Welcome to Dongguan Shenpeng Electronics Co., Ltd!

Shenpeng Electronics

Water Pump to provide solutions

+86-769-81868638
Return Products Sort

What is food grade pump

Published:2021-12-03

20210525142131_7031.jpg

1. What is a food grade pump:

food grade pump is use materials that can directly contact food must be food-grade, generally they are pumps made of food-grade stainless steel or other food-grade materials. Shenpeng food grade pump, the materials used to make the pumps have reached food-grade certification, and the pumps have also passed food-grade certification as a whole, with long life, no maintenance, small size, high efficiency, low power consumption, strong anti-interference ability, and stable operation.

 

2. The food-grade high temperature brushless DC water pump produced by Shenpeng can do:

(1). The material is FDA-certified ABS material, so you can rest assured! To

(2). Combining the characteristics of the brushless DC pump can increase the efficiency by 20%, and the cavity structure can be cleaned without disassembly and assembly;

(3). The pumped liquid flows out from the center of the motor, which can reduce the temperature rise generated during the operation of the motor and extend the service life; no lubricating grease is added; the water pump bearing structure does not have any grease or lubricants, which will not cause safety hazards to food;

(4). The structure design of the hybrid pump that combines axial flow and centrifugal flow meets the high-efficiency heat dissipation effect of the pump itself. The motor and rotor isolation screen structure is adopted to achieve natural lubrication effect when the pump is working.

 

3. The standards and materials of Shenpeng food grade pump:

Food grade pump should have the following technical properties, such as the corresponding air permeability, moisture permeability, chemical stability, physical and mechanical properties, airtightness (measured with a sealing tester), light-shielding, fragrance retention, etc. Adaptability of the production process It can meet the requirements of packaging mechanization and automated production processes, such as material sterilization, molding, etc., which are basically food-grade, safe, non-toxic and environmentally friendly, generally costly, but safe, environmentally friendly and healthy.


service telephone:0769-81868638
Share to